MKS Model NV8388 face steamer provides deep moisturizing with prolonged effects.

Cold and hot combination option available to ensure the best results.
MKS Research and Development centre has found that using a face steamer that only has either hot or cold options causes the pores to be expanded or shrunk for an extended period of time. This causes excessive damage to the skin and pores.

MKS face steamer with a patent design comes with a dual-mode option for deep cleansing and moisturization.

Start off with hot steam to allow expansion of the pore to release impurities, followed by a cold breeze that calms and tightens the skin to relieve pressure while retaining moisture.

Comes with an installed procedural system that sprays 1 second of cold mist and 1 minute of hot steam for the best effect without harming your skin.

High-density mist of up to 30 grams per minute is 50% more than other face steamers on the market. This allows for high hydration quality.

It can be paired with a mask for a 3 to 5 times improvement in absorption rate.

Designed and fitted with an individual reservoir for essential oil, adjustable nozzle, and a 180mL water reservoir.

Product Specifications:
Brand: MKS
Model: NV8388
Power: 320 W
Frequency: 50 Hz
Volume: 180mL

Can Continue operate approximately 18 minutes (hot) | 60 minutes (cold)

FAQ:
Q: Why are there water droplets on the machine when I receive it?
A: Every MKS Face Steamer is tested under strict conditions for leaks and deficits before being sent out. Once the test is completed, the machine is dried under natural conditions as artificial heating will shorten the product's lifespan. Hence, there may be moisture within the machine when received, but this does not affect its functionality.

Q: What kind of water should be used for the face steamer?
A: For a better effect and experience, please use DISTILLED WATER. Water from other water dispensers may affect cause calcium carbonate or other stains to be built up within the machine, affecting its durability and lifespan. PLEASE DO NOT add toner, essential oil, or other skincare product into the machine itself. Can be applied on the skin before using the face steamer for a better absorption effect.

Usage Instructions:
1) Open packaging
2) Take out the water reservoir
3) Open water reservoir cover
4) Fill with water
5) Close the cap and install the reservoir
6) Remove essential oil holder
7) Remove protective cap
8) Drip in 2 to 3 drops of essential oil (do not overflow it)
9) Close the cap
10) Install back the essential oil holder
11) Turn on the machine and select the steaming function. (Skip step 6 to 10 if no essential oil is used)
12) Start using!